home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Enlighten DSM 3.1
/
SGI EnlightenDSM 3.1.iso
/
IRIX5X6X
/
ADMIN.Z
/
ADMIN
/
help
/
C
/
online0701.hlp
< prev
next >
Wrap
Text File
|
1999-04-16
|
2KB
|
47 lines
ARCHIVE DEVICE CONFIGURATION
You can use this module to add backup devices to the system. The
device can be a custom device, a reel to reel tape, a 1/4-inch
cartridge tape, or a raw device type. The Archive Device
Configuration window, as shown below, lists which devices are
available for archiving data.
From this window, you have the following options:
+ Add a device
+ Modify a device
+ Delete a device
Add
Click on the Add button to add a backup device. Enter the
appropriate information in the Archive Device Add window, which is
shown on the next page.
Modify
You can use this to view and/or modify the backup devices configured
on your system. Highlight any logical device name you wish to
modify, then click on the Modify button. A window will appear
similar to the Archive Device Add window, except the Logical Device
Name field is view-only.
There are also two button differences in the Modify window:
+ you can use the Modify button (rather than the Add button) after
you've made all your changes and
+ you can use the Next button to modify additional backup schedules
if you've selected more than one backup to modify from the Add
Device Configuration list.
Delete
Use the delete command to remove an Enlighten backup device from the
system. Once a device has been removed, the only way to re-install
it is to recreate the device, so use care with this command. To
ensure the correct backup device is being deleted, Enlighten will
prompt you for confirmation before deleting it.